mo.relay_plus_manual_en
Details
The PLUS is where it is!
The mo.relay+ purposely combines a load-independent digital flasher relay and electronic push-button controls.
Depending on how long the turn signal push button is activated, 4 different operating modes are available:
Lane change: Short push button press - 3x flashing and automatic shutdown.
Turn: Briefly press the push button - 10x flashing and automatic switch-off.
Continuous flashing: long press of the push button - stop only after pressing the push button several times.
In addition, the mo.relay+ is equipped with a hazard warning light function - activated by pressing both push buttons simultaneously.
The mo.relay+ is load-independent (1 to 100 W) and provides a constant flashing frequency to almost all models of LED, micro or halogen indicators as well as 10 or 21 W bulbs. Immediate illumination , lossless and brighter results from efficient microelectronics.
The lightweight and compact aluminum housing is black anodized and has an M3 mounting thread. Removable mounting with cable ties is also possible. Ideal for mods and custom bikes with limited mounting space. The electronics are waterproof, vibration resistant and equipped with overload protection.
If you are looking for a flasher relay WITHOUT push button controls, please refer to our mo.flash or mo.wave series.
If you are looking for a flasher relay WITHOUT push button controls but with automatic deactivation, please refer to our mo.stop series
If you are looking for complete push button controls with many additional features, please refer to our mo.unit series.
Advantages
- Very compact, light and easy to assemble
- Ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past
- No additional push button control unit required
- Intuitive time control and auto-off
- Almost independent of load (min. 1 Watt)
- Completely implemented using digital semiconductor technology. microprocessor controlled No mechanical operation, no coils, no electrical contacts
- Constant and correct turn signal frequency and suitable for almost all LED turn signals, all micro and halogen turn signals as well as all 10 and 21 watt turn signals
- for example works with 4 indicators or 2 handlebar end indicators
- Immediate lossless and brighter illumination of all turn signals
- Fully waterproof and vibration resistant thanks to molded construction
- Short circuit proof, automatic overload protection, power switches up to 100W.
- No heat generation during operation
- Only 5 - 18 V operating voltage required
- Quality 'made in Germany' - by motogadget
Specifications and features
| Diameter without cable | 19 millimeters |
| the size | 19 millimeters |