Motogadget

motoscope pro BMW R9T (Specially for BMW R nine T)

Manuel
$649.95
/
Shipping calculated at checkout.
AVAILABLE FOR ORDER

The prices displayed on the website do not include any customs duties or potential import taxes. Additional charges (such as customs duties, taxes, brokerage fees, or any other fees required by the authorities of the destination country) may be requested from the customer by the carrier or the relevant authorities at the time of delivery. These fees, which cannot be reasonably determined in advance, are the sole responsibility of the customer, who is responsible for checking the applicable regulations in their country before placing an order. If you refuse the delivery, a refund will be issued once the package has been received by the sender. Return costs (shipping, taxes, and customs fees) will be deducted from the refunded amount. Please note that if you choose DHL Express, shipments are only picked up on Tuesdays and Thursdays.



Required for installation:

msp Bracket BMW 9T

$74.95

Details

The BMW R9T motoscope pro is the only plug & ride instrument on the market.

The motoscope pro's CAN bus interface allows full mapping of all factory functions (except heated grip adjustment). The original wiring harness connector makes the instrument a true plug & ride solution. Plug it in and go!

An LED matrix display enables an ultra-flat housing design. 734 individual LEDs, controlled by a 16-bit Risc processor, form the self-illuminating display. They guarantee optimal readability - even in direct sunlight. The automatic brightness adjustment is a matter of course.

The speed is displayed on an analog LED strip with drag pointer function. The main and secondary display are self-configurable. Another display area shows the gear engaged. Four indicator lights are already integrated and can be used using the display for many more input signals.

The aluminum housing is milled from solid, anodized and can be easily attached using two threaded bushings on the back. The instrument has an ABE and should not be entered X

> Compatible with BMW R nineT model 2014, 2015, 2016

> NOT compatible with BMW R nineT model 2017 and later, R nineT Urban G/S, R nineT Pure, R nineT Racer, R nineT Scrambler

--

msp_bmwr9t_hinweise_en

#1005031

Scope of delivery

  • motoscope pro with approx. 60 cm connection cable and socket for R9T
  • 2 stainless steel mounting screws
  • Detailed installation and usage instructions
Under the "Assembly" tab you will find the matching bracket for the BMW R9T pictured here Attention: Touch sensor is no longer included, heated grip control

via the instrument is not possible.

Specifications and Features

Length Width Depth 109mm / 47mm / 11mm
weight about 100g
Attachment 2 x M3 threaded sleeve
Power consumption during operation approx. 200 mA (depending on load)
Idle power consumption 0.4mA
Operating voltage 9V - 15V
operating -20°...+80°C
Tachometer (LED strip) 0 - 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Speedometer 0 to 350 km/h or mph
Odometer A up to 999.9 km or mi
Odometer B up to 999.9 km or mi
Total kilometers (adjustable) up to 250000 km or mi
Service / service hours counter 0 to 9999.5h
Hours 23:59 hrs/min
Travel time display 0 to 99:59:59 hrs/min/s
Tachometer (on LCD) 0 to 20000 rpm
adjustable speed warning (shift light) 0 to 20000 rpm
Integrated voltage display 9 - 18V
Low voltage warning Warning if below about 11V
Timing from 0 to 100 km/h or 0 to 60 mph 0.00 - 30.59 sec.
momentary acceleration +/- 0.00 - 1.50G
Average speed 0 to 350 km/h or mph
Maximum speed value 0 to 350 km/h or mph
Maximum speed value 0 to 20000 rpm
max. positive acceleration +1.50G
max. negative acceleration - 1.50G
Speed ​​indicator N, speed 1-6
Green control LED Inactive (N)
Green control LED Left, right indicators
Blue control LED High beam
Red warning LED Warning functions for check engine light / ABS / low fuel
Petrol / reserve Low fuel warning