motoscope pro (digital speedometer)
The motoscope pro is the latest generation digital dashboard from motogadget.
State-of-the-art technology enables an ultra-flat case design. 734 LEDs, controlled by a 16-bit Risc processor, form the almost entirely self-illuminating display matrix. It guarantees optimal readability - even in direct sunlight. Automatic brightness adjustment is a matter of course, and the speed is displayed freely upgradable via an analog LED strip with drag pointer function.
The main and secondary display are self-configurable. Another display area shows the gear engaged.
Four indicator lights are already integrated and can be used using the display for many more input signals. Junction box A or B is also required for connection wiring of indicator lights and/or measurement inputs. See the “Chatboxes” tab above.
The motoscope pro has a full CAN bus interface and is therefore prepared for many future developments of plug 'n ride solutions. See, for example, the “Breakout Box Triumph” tab above. The dashboard communicates via its own single-wire digital bus (m-BUS) with additional breakout boxes that simply expand the range of functions.
The dashboard is therefore extremely versatile and can be adapted to a large number of vehicles and applications.
The aluminum housing is milled from solid, anodized and can be easily attached using two threaded bushings on the back. The instrument has an ABE and should not be entered.
Please order the breakout box to connect the indicator lights (see standard breakout box) or to digital bus systems (Triumph, HD). No junction box is required for the BMW R9T.
Scope of delivery
- Instrument with approx. 70 cm connection cable
- Speedometer sensor M5 x 0.5 fine thread (stainless steel, IP67) with approx. 150 cm connection cable
- 2 magnets
- Mini push button
- 10 cable end connectors
- flying fuse
- 2 stainless steel mounting screws
- Detailed installation and usage instructions
Specifications and Features
|Length Width Depth||109mm / 47mm / 11mm|
|Weight with cable||about 100g|
|Attachment||2 x M3 threaded sleeve|
|Power consumption during operation||approx. 200 mA (depending on load)|
|Idle power consumption||0.4mA|
|Operating voltage||9V - 15V|
|Tachometer (LED strip)||0 - 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)|
|Speedometer||0 to 350 km/h or mph|
|Odometer A||up to 999.9 km or mi|
|Odometer A||up to 999.9 km or mi|
|Total kilometers (adjustable)||up to 250000 km or mi|
|Service / service hours counter||0 to 9999.5h|
|Travel time display||0 to 99:59:59 hrs/min/s|
|Tachometer (on LCD)||0 to 20000 rpm|
|adjustable speed warning (shift light)||0 to 20000 rpm|
|Integrated voltage display||9 - 18V|
|Low voltage warning||Warning if below about 11V|
|Timing from 0 to 100 km/h or 0 to 60 mph||0.00 - 30.59 sec.|
|momentary acceleration||+/- 0.00 - 1.50G|
|Average speed||0 to 350 km/h or mph|
|Maximum speed value||0 to 350 km/h or mph|
|Maximum speed value||0 to 20000 rpm|
|max. positive acceleration||+1.50G|
|max. negative acceleration||- 1.50G|
|Speed indicator||N, speed 1-6|
|Green control LED (with A/B junction box)||Inactive (N)|
|Green control LED (with A/B junction box)||Left, right indicators|
|Blue control LED (with A/B breakout box)||High beam|
|Red warning LED (with A/B breakout box)||various warning functions|
|Petrol/reserve (with junction box A/B)||0-100% with low warning|
|Air temperature * (with junction box B)||-20 - 80°C / -4 - 176°F with high/low warning|
|Water temperature * (with junction box B)||40 - 120°C / 104 - 248°F with high/low warning|
|Oil temperature * (with junction box B)||40-150°C / 104-302°F with high/low warning|
|Oil pressure * (with junction box B)||0.5 - 8 bar / 0 - 116 psi with high / low warning|