Motogadget

Chronoclassic (Analogue tachometer with many functions)

ManuelDimension
$719.95
/
Shipping calculated at checkout.
AVAILABLE FOR ORDER

The prices displayed on the website do not include any customs duties or potential import taxes. Additional charges (such as customs duties, taxes, brokerage fees, or any other fees required by the authorities of the destination country) may be requested from the customer by the carrier or the relevant authorities at the time of delivery. These fees, which cannot be reasonably determined in advance, are the sole responsibility of the customer, who is responsible for checking the applicable regulations in their country before placing an order. If you refuse the delivery, a refund will be issued once the package has been received by the sender. Return costs (shipping, taxes, and customs fees) will be deducted from the refunded amount. Please note that if you choose DHL Express, shipments are only picked up on Tuesdays and Thursdays.

details

The motogadget Chronoclassic is a digital multifunction instrument in a classic round case.

Technically identical to the classic motoscope, the Chronoclassic is characterized by its black dial and white pointer. The design is reminiscent of old Smiths instruments.

versions

Another special feature, the dark LC display of the DarkEdition gives the instrument an even more harmonious appearance.

However, we expressly point out that readability is reduced in direct sunlight. If you value the best possible readability, please use the green standard display.

The identical instrument is also available as an analog speedometer (see Classic analog speedometer series).

delivery

  • Instrument with approx. 55 cm connection cable
  • Connection by complete plug
  • fuse
  • Speedometer sensor M5 x 0.5 (fine thread) with 150 cm connection cable
  • 2x magnet
  • mini button
  • 3 VA M4 screws
  • Detailed installation and usage instructions
Please note that temperature and pressure sensors must be ordered separately (see accessories).

--

msc_chc_manual_en_4.9_k

Specifications and Features

Installation diameter 80mm
Total diameter (screw ring): 85mm
Depth without gland 34mm
weight about 230g
attachment 3 x M4 threaded sleeve
Power consumption during operation approx. 200 mA (depending on load)
Idle power consumption 0mA
the service voltage 9V - 18V
operating -20°...+80°C
Tachometer (analog / pointer) 0 - 8, 10 or 14 krpm
Speedometer (LCD) 0 to 350 km/h or mph
trip meter up to 999 km or mi
Total kilometers (adjustable) up to 250,000 km or mi
Driving time display 0 to 99:99:99 hrs/min/s
Tachometer (on LCD) 0 to 20,000 rpm
adjustable gear warning (inner LED and outer shift light) 0 to 20,000 rpm
voltage display board 9V - 18V
NEW! Low voltage warning LED flashes when on-board voltage drops below approximately 11V - replaces charging light
Air temperature * (optional instead of water temperature) -20 - 80°C / -4 - 176°F with high/low warning
Water temperature * (optional instead of air temperature) 40 - 120°C / 104 - 248°F with high/low warning
Oil temperature * 40-160°C / 104-320°F with high/low warning
Oil pressure * 0.5 - 8 bar / 8 - 116 psi with high/low warning
Timing from 0 to 100 km/h or 0 to 60 mph 0.0 - 99.9 sec.
momentary acceleration (-20.0) - 20.0m/s2
The average speed 0 to 350 km/h or mph
Maximum speed value 0 to 350 km/h or mph
Maximum speed value 0 to 20,000 rpm
max. positive acceleration 0 to 20.0m/s2
max. negative acceleration 0 - (- 20.0) m/s2
speed indicator N, speed 1-6
Green control LED Inactive (N)
Yellow control LED Left, right indicators
Blue control LED Redlights
Red warning LED Various external (eg oil pressure switch), internal (speed, temperature, pressure, voltage) warning functions
Output for ext. shift light switching capacity max. 1.4A